Items where Subject is "FOR Classification > 0912 Materials Engineering"
|Up a level|
Al-deen, Safat and Gianluca, Ranzi and Vrcelj, Zora (2010) Full-scale long-term experiments of simply supported composite beams with solid slabs. Journal of Constructional Steel Research, 67 (3). pp. 308-321. ISSN 0143-974X
Al-deen, Safat and Ranzi, Gianluca and Vrcelj, Zora (2011) Full-scale long-term and ultimate experiments of simply-supported composite beams with steel deck. Journal of Constructional Steel Research, 67 (10). pp. 1658-1676. ISSN 0143-974X
Al-deen, Safat and Ranzi, Gianluca and Vrcelj, Zora (2011) Shrinkage effects on the flexural stiffness of composite beams with solid slabs: an experimental study. Engineering Structures, 33 (4). pp. 1302-1315. ISSN 0141-0296
Bigger, Stephen and Cran, Marlene and Tawakkal, Intan Syafinaz Mohamed Amin (2015) Two novel algorithms for the thermogravimetric assessment of polymer degradation under non-isothermal conditions. Polymer Testing, 43. 139 - 146. ISSN 0142-9418
Bigger, Stephen W and Gribben, Mark and Rogers, Allan (2008) Colour Changes in Pigmented Nylon-6 Systems Containing Copper Iodide. Polymer Degradation and Stability, 93 (9). pp. 1711-1714. ISSN 0141-3910
Bradford, Mark A and Vrcelj, Zora (2009) Inelastic restrained distortional buckling of continuous composite T-beams. Journal of Constructional Steel Research, 65 (4). pp. 850-859. ISSN 0143-974X
Cran, Marlene Jane and Rupika, L. A. S and Sonneveld, Kees and Miltz, Joseph and Bigger, Stephen W (2010) Release of Naturally Derived Antimicrobial Agents from LDPE Films. Journal of Food Science, 75 (2). E126-E133. ISSN 0022-1147
Dumee, L and She, F and Duke, Mikel and GRAY, Stephen and Hodgson, P and Kong, L (2014) Fabrication of meso-porous sintered metal thin films by selective etching of silica based sacrificial template. Nanomaterials, 4 (3). 686 - 699. ISSN 2079-4991
Dumee, Ludovic and He, Li and Lin, Bao and Ailloux, Francois-Marie and Lemoine, Jean-Baptiste and Velleman, Leonora and She, Fenghua and Duke, Mikel and Orbell, John and Erskine, Gilbert and Hodgson, Peter D and Gray, Stephen R and Kong, Lingxue (2013) The fabrication and surface functionalization of porous metal frameworks – a review. Journal of Materials Chemistry A, 1 (48). pp. 15185-15206. ISSN 2050-7496
Dumée, LF and He, L and Wang, Z and Sheath, P and Xiong, J and Feng, C and Tan, MY and She, F and Duke, Mikel and Gray, Stephen and Pacheco, A and Hodgson, P and Majumder, M and Kong, L (2015) Growth of nano-textured graphene coatings across highly porous stainless steel supports towards corrosion resistant coatings. Carbon, 87. 395 - 408. ISSN 0008-6223
Fragomeni, Sam and Menefy, Luke (2010) Factors affecting the production and characteristic strengths of reactive powder concretes. Concrete in Australia, 36 (1). pp. 17-26. ISSN 1440-656X
Gohari, S and Sharifi, S and Vrcelj, Zora (2016) New explicit solution for static shape control of smart laminated cantilever piezo-composite-hybrid plates/beams under thermo-electro-mechanical loads using piezoelectric actuators. Composite Structures, 145. 89 - 112. ISSN 0263-8223
Guerrieri, Maurice and Fragomeni, Salvatore (2016) Mechanisms of Spalling of Concrete Panels of Different Geometry in Hydrocarbon Fire. Journal of Materials in Civil Engineering, 28 (12). ISSN 0899-1561
Guerrieri, Maurice and Sanjayan, Jay G (2009) Behavior of combined fly ash/slag-based geopolymers when exposed to high temperatures. Fire and Materials, 34 (4). pp. 163-175. ISSN 0308-0501
Guerrieri, Maurice and Sanjayan, Jay G and Collins, F (2008) Effect of slag on the performance of concretes in hydrocarbon fire. ACI symposium publications: proceedings of 'Designing Concrete Structures for Fire Safety', session at the ACI Spring Convention, Atlanta, United States, 22-26 April 2007, 255 (2). pp. 23-45. ISSN 0193-2527
Joseph, Paul and Tretsiakova-McNally, S (2015) Melt-Flow Behaviours of Thermoplastic Materials under Fire Conditions: Recent Experimental Studies and Some Theoretical Approaches. Materials, 8 (12). 8793 - 8803. ISSN 1996-1944
Khatun, Madhury and Gharib, M and Bradford, MA and Vrcelj, Zora (2015) Analysis of thick and orthotropic rectangular laminated composite plates using a state-space-based generalised RKP-FSM. Composite Structures, 133. 691 - 706. ISSN 0263-8223
Lemma, Engida and Deam, R. T and Chen, Li (2005) Maximum depth of cut and mechanics of erosion in AWJ oscillation cutting of ductile materials. Journal of Materials Processing Technology, 160 (2). pp. 188-197. ISSN 0924-0136
Li, G and Rouillard, V and Sek, MA (2014) Evaluation of static and dynamic cushioning properties of polyethylene foam for determining its cushion curves. Packaging Technology and Science, 28 (1). 47 - 57. ISSN 0894-3214
Liang, Qing Quan and Fragomeni, Sam (2010) Nonlinear analysis of circular concrete-filled steel tubular short columns under eccentric loading. Journal of Constructional steel research, 66 (2). pp. 159-169. ISSN 0143-974X
Nazari, M and Rubio-Martinez, M and Tobias, G and Barrio, JP and Babarao, R and Nazari, F and Konstas, K and Muir, BW and Collins, Stephen and Hill, AJ and Duke, MC and Hill, MR (2016) Metal-Organic-Framework-Coated Optical Fibers as Light-Triggered Drug Delivery Vehicles. Advanced Functional Materials, 26 (19). 3244 - 3249. ISSN 1616-301X
Payamyar, P and Kaja, K and Ruiz-Vargas, C and Stemmer, A and Murray, DJ and Johnson, CJ and King, BT and Schiffmann, Florian and Vandevondele, J and Renn, A and Götzinger, S and Ceroni, P and Schütz, A and Lee, LT and Zheng, Z and Sakamoto, J and Schlüter, AD (2014) Synthesis of a covalent monolayer sheet by photochemical anthracene dimerization at the air/water interface and its mechanical characterization by AFM indentation. Advanced Materials, 26 (13). 2052 - 2058. ISSN 0935-9648
Sek, Michael A and Rouillard, Vincent and Parker, Anthony James (2007) Characterisation of the Nonlinear Behaviour of Expanded Polystyrene Cushions. Applied Mechanics and Materials, 7-8. pp. 283-288. ISSN 1660-9336 (print) 1662-7482 (online)
Sharifishourabi, G and Alebrahim, R and Sharifi, S and Ayob, A and Vrcelj, Zora and Yahya, MY (2014) Mechanical properties of potentially-smart carbon/epoxy composites with asymmetrically embedded shape memory wires. Materials and Design, 59. 486 - 493. ISSN 0264-1275
Song, Chongmin and Vrcelj, Zora (2008) Evaluation of dynamic stress intensity factors and T-stress using the scaled boundary finite-element method. Engineering Fracture Mechanics, 75 (8). pp. 1960-1980. ISSN 0013-7944
Suppakul, Panuwat and Sonneveld, Kees and Bigger, Stephen W and Miltz, Joseph (2008) Efficacy of polyethylene-based antimicrobial films containing principal constituents of basil. LWT Food Science and Technology, 41 (5). pp. 779-788. ISSN 0023-6438
Tawakkal, ISMA and Cran, Marlene and Bigger, Stephen (2016) Interaction and quantification of thymol in active PLA-based materials containing natural fibers. Journal of Applied Polymer Science, 133 (2). ISSN 0021-8995
Thomas, Ian and Moinuddin, Khalid A. M and Bennetts, Ian (2007) The Effect of Fuel Quantity and Location on Small Enclosure Fires. Journal of Fire Protection Engineering, 17 (2). pp. 85-102. ISSN 1042-3915
Vrcelj, Zora and Bradford, Mark A (2010) On using Legendre polynomials and amended spline transformations in the SFSM for buckling and free vibrations of plates and thin-walled beams. Thin-Walled Structures, 48 (10-11). pp. 798-805. ISSN 0263-8231
Vrcelj, Zora and Bradford, Mark A (2008) A simple method for the inclusion of external and internal supports in the spline finite strip method (SFSM) of buckling analysis. Computers and Structures, 86 (6). pp. 529-544. ISSN 0045-7949
Baidya, Narayan and Mendis, Priyan and Fragomeni, Sam (2011) Evaluation of creep, shrinkage and modulus of elasticity models for high strength concrete. In: Incorporating sustainable practice in mechanics of structures and materials. Fragomeni, Sam and Venkatesan, Srikanth and Lam, Nelson and Setunge, Sujeeva, eds. CRC Press, Boca Raton, Fla., pp. 239-244. ISBN 9780415616577 (print), 9780203829868 (online)
Gamage, Nirdosha and Setunge, Sujeeva and Jollands, M (2006) Evaluation of physical properties of hardwood particleboard. In: Developments in composites : advanced, infrastructural, natural & nano-composites : 11-14 July, 2006 University of New South Wales, Sydney, Australia. Bandyopadhyay, Sri and Zeng, Q and Samudrala, Saritha, eds. University of New South Wales, Sydney. ISBN 0733423639
Guerrieri, Maurice and Fragomeni, Sam (2010) Spalling of normal strength concrete walls in fire. In: Structures in Fire : Proceedings of the 6th International Conference. Kodur, Venkatesh and Franssen, Jean-Marc, eds. DEStech Publications, Lancaster, Pa., pp. 301-311. ISBN 9781605950273
Guerrieri, Maurice and Kong, Daniel and Sanjayan, Jay G (2009) Performance of Alkali Activated Slag and Geopolymer Concrete in Fire. In: From real life experiences and practical applications to lab scale investigations and numerical modelling : 1st International Workshop on Concrete Spalling Due to Fire Exposure ; [03 - 05 September 2009, in Leipzig] ; proceedings. Dehn, Frank and Koenders, Eduardus Aloysius Berndardus, eds. Leipzig Institute for Materials Research and Testing, Leipzig, Germany, pp. 402-424. ISBN 9783000286049, 3000286047
Joseph, Paul and Tretsiakova-McNally, S (2013) Chemical modification of natural and synthetic textile fibres to improve flame retardancy. In: Handbook of Fire Resistant Textiles. Kilinc, FS, ed. Woodhead Publishing Series in Textiles . Woodhead Publishing, Cambridge, UK, pp. 37-67. ISBN 9780857091239
Kuorwel, Kuorwel Kuai and Bigger, Stephen W and Cran, Marlene Jane and Sonneveld, Kees and Miltz, Joseph (2010) The Antimicrobial Activity of Carvacrol and Linalool Against S. aureus for the Packaging of Cheddar Cheese. In: Proceedings of the 17th IAPRI World Conference of Packaging. Binglin, L. U, ed. Scientific Research Publishing, Irvine, California, pp. 631-634. ISBN 9781935068365
Liang, Qing Quan (2010) Performance-based shape optimization of continuum structures. In: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics : 19-23 July, 2010, Sydney, Australia. IOP conference series : materials science and engineering (10). Institute of Physics, Bristol, U.K..
Liang, Qing Quan and Uy, Brian and Wright, Howard D and Bradford, Mark A (2003) Local and post-local buckling of steel-concrete composite panels under combined states of stresses. In: Advances in structures : proceedings of the International Conference on Advances in Structures (ASSCCA '03), Sydney, Australia, 22-25 June 2003. Hancock, Gregory J and Bradford, Michael A and Wilkinson, T. J and Uy, Brian and Rasmussen, K. J. R, eds. A. A. Balkema Publishers, Exton, PA, pp. 723-728. ISBN 9058095886
Proe, David and Johnson, P and Hough, R (2003) Design of structures for fire in the Australian regulatory environment and the impact of the WTC collapse. In: The CIB-CTBUH Conference on Tall Buildings: Strategies for performance in the aftermath of the World Trade Centre. Faridah, Shafii and Bukows, Richard and Klemencic, Ron, eds. CIB proceedings (290). The International Council and Research and Innovation in Building and Construction, Rotterdam, The Netherlands, pp. 665-672. ISBN 9834128304
Rojter, Josef (2010) Emphasising professional engineering elements in the teaching of materials technology. In: American Society for Engineering Education annual conference and exposition 2010 : Louisville, Kentucky, USA, 20-23 June 2010. American Society for Engineering Education, Washington, D.C., pp. 7865-7877. ISBN 9781617820205
Rojter, Josef (2011) Engineering education for the engineering profession. In: ICEE 2011:Engineering Sustainability for a Global Economy : proceedings. Uhomoibhi, J, ed. International Network for Engineering Education & Research, Belfast, UK. ISBN 1562-3580
Rojter, Josef (2011) Problem based learning in engineering curriculum: the case of materials technology. In: ICEE 2011:Engineering Sustainability for a Global Economy : proceedings. Uhomoibhi, J, ed. International Network for Engineering Education & Research, Belfast, UK. ISBN 1562-3580
Ronagh, Hamid R and Liang, Qing Quan and Uy, Brian and Bradford, Mark A (2002) Ultimate strength of composite beams in combined bending and shear. In: ICSCS04: Proceedings of the 2nd International Conference on Steel and Composite Structures, held in Seoul, Korea, 2-4 September, 2004. Choi, Chang Koon and Schnobrich, William C, eds. Techno Press, Busan, Korea, pp. 1155-1168. ISBN 8989693128 9788989693055
Rouillard, Vincent and Sek, Michael A and Parker, Anthony James (2005) Characterising the Non-Linear Behaviour of Polymeric Foam Cushions. In: Proceedings: 12th Annual International Conference on Composites/Nano Engineering (ICCE-12). Hui, David, ed. International Community for Composites/Nano Engineering.
Conference or Workshop Item
Bigger, Stephen W and Cran, Marlene Jane and Lefebve, Michel S (2012) Biodegradation of expanded polystyrene modified with a novel polymer additive. In: MoDeSt 2012 Conference, 2nd September 2012 - 6th September 2012, Prague, Czech Republic.
Buddi, T and Muttil, Nitin and Nageswara Rao, B and Singh, SK (2015) Development of a Soya Based Adhesive in Plywood Manufacturing. In: 4th International Conference on Materials Processing and Characterzation (ICMPC 2015), 14 March 2015-15 March 2015, Hyderabad, India.
Wang, Vincent and Fragomeni, Salvatore (2016) Towards smart fire-resistant concrete buildings: An internet of things (IoT) boosted strategy. In: 41st Conference on Our World in Concrete & Structures, 24 August 2016-26 August 2016, Singapore. (Unpublished)
Askraba, Sreten (1999) A new vibrational technique for measurement of stress variations in thin films. PhD thesis, Victoria University of Technology.
Bong, Budi Galianto (1998) Optimal applications of high-strength concrete in structural walls of tall buildings. Research Master thesis, Victoria University of Technology.
Cheng, Jie (2000) The influence of fiber hybridisation on dynamic mechanical behavior of natural based composites. Research Master thesis, Victoria University of Technology.
Eagleton, Danny Geoffrey (1995) Creep properties of corrugated fibreboard containers for produce in simulated road transport environment. Research Master thesis, Victoria University of Technology.
Kuorwel, Kuorwel Kuai (2011) Incorporation of natural antimicrobial agents into starch-based material for food packaging. PhD thesis, Victoria University.
Maisano, Paul Angelo (1995) Puncture resistance of geotextiles and evaluation of the g-rating classification system. Coursework Master thesis, Victoria University of Technology.
Ngugen, Thang Duc (1996) Development of silane / siloxane emulsions for application in building protection. PhD thesis, Victoria University of Technology.
Nguyen, Vu Thua (1999) Finite element simulation of Durelli's photoelastic stress minimization method for shape optimization. Research Master thesis, Victoria University of Technology.
Nyankina, Katerina (2003) Prediction of water droplet behaviour during fire extinguishment. PhD thesis, Victoria University of Technology.
Oqueli, Claudia Larissa (1997) Laboratory specimen preparation for cold recycled asphalt. Research Master thesis, Victoria University of Technology.
Patel, Vipulkumar Ishvarbhai (2013) Nonlinear inelastic analysis of concrete-filled steel tubular slender beam-columns. PhD thesis, Victoria University.
Payne, David Alexander (1993) Effect of cullet level on amber glass quality, workability and commercial viability. Coursework Master thesis, Victoria University of Technology.
Prakash, Mahesh (2000) Interaction between turbulent flow and saturated porous media. PhD thesis, Victoria University of Technology.
Ren, Kebao (1995) Investigation of impregnants for low-cost buildings. PhD thesis, Victoria University of Technology.
Shehab, Hussein Mahanny (2011) Study of creep characteristics of multi-layered corrugated fibre board protective cushions. Research Master thesis, Victoria University.
Tawakkal, ISMA (2016) Characterisation and antimocrobial activity of poly(lacitc acid)/kenaf bio-composites containing a natural agent. PhD thesis, Victoria University.
Truong, Tam Dinh (2000) Engineering applications of electro-rheological fluids. Research Master thesis, Victoria University of Technology.
Warsiki, Endang (2006) The effect of structure on the mass transport of acetaldehyde in virgin and recycled poly(ethylene terephthalate). PhD thesis, Victoria University.