Modelling heat and mass transfers in DCMD using compressible membranes

[thumbnail of JMS-11290R2_2[2].pdf]
Preview
JMS-11290R2_2[2].pdf - Accepted Version (1MB) | Preview

Zhang, Jianhua, Gray, Stephen ORCID: 0000-0002-8748-2748 and Li, Jun-de (2012) Modelling heat and mass transfers in DCMD using compressible membranes. Journal of Membrane Science, 387-88. pp. 7-16. ISSN 0376-7388 (print), 1873-3123 (online)

Abstract

A model for predicting the flux and evaporation ratio in direct contact membrane distillation (DCMD) using a compressible membrane is presented. Polytetrafluoroethylene (PTFE) membranes, one of the most common types of membranes employed in MD, are characterised with high porosity (∼90%) and high hydrophobicity, and therefore have high water vapour permeability and high wetting resistance. However, the PTFE membrane is compressible due to its structure. Compression of the membrane will cause a change of its physical structure, such as porosity, thickness, and pore size. As a result, the thermal conductivity and vapour permeability of the membrane will be altered, causing a change in flux and energy efficiency. Such effects need to be accounted for when scaling up from laboratory data to full scale design, because there may be significant differences in the applied pressure. Therefore, in this paper, the influence of pressure on the flux of the compressible PTFE membrane was modelled. This paper also provides a mathematical method to correlate the applied pressures with physical structure changes based on the assumption of constant tortuosity. The modelling results were compared with experimental results over a range of variable process parameters, i.e., temperatures, velocities, membrane lengths, and pressure applied to the membrane. The errors between the model predictions and experimental results were less than 10% within the operating range used in this investigation.

Dimensions Badge

Altmetric Badge

Item type Article
URI https://vuir.vu.edu.au/id/eprint/22035
DOI 10.1016/j.memsci.2011.08.034
Official URL http://ac.els-cdn.com/S0376738811006119/1-s2.0-S03...
Subjects Historical > FOR Classification > 0904 Chemical Engineering
Current > Division/Research > College of Science and Engineering
Historical > Faculty/School/Research Centre/Department > Institute for Sustainability and Innovation (ISI)
Keywords ResPubID25476, direct contact membrane distillation, desalination, flux modelling, compressible membranes, heat transfer, mass transfer
Citations in Scopus 96 - View on Scopus
Download/View statistics View download statistics for this item

Search Google Scholar

Repository staff login