0303 Macromolecular and Materials Chemistry

< Back to all Subject/college/research areas
Number of items at this level: 42.
Group by: Item type | Creators | Date


Scheirs, J, Delatycki, O, Bigger, Stephen and Billingham, NC (1991) Staining techniques for detecting localized oxidation in high density polyethylene powders and films. Polymer International, 26 (3). 187 - 193. ISSN 0959-8103

August 1992

Scheirs, J, Bigger, Stephen and Billingham, NC (1992) Effect of chromium residues on the stability of gas-phase high-density polyethylene produced by supported catalysts. Journal of Polymer Science Part A: Polymer Chemistry, 30 (9). 1873 - 1889. ISSN 0887-624X

September 1992

Bigger, Stephen, Scheirs, J and Delatycki, O (1992) Effect of light intensity on the photooxidation kinetics of high-density polyethylene. Journal of Polymer Science Part A: Polymer Chemistry, 30 (10). 2277 - 2280. ISSN 0887-624X

15 March 1993

Scheirs, J, Bigger, Stephen, Then, ETH and Billingham, NC (1993) The application of simultaneous chemiluminescence and thermal analysis for studying the glass transition and oxidative stability of poly(N-vinyl-2-pyrrolidone). Journal of Polymer Science Part B: Polymer Physics, 31 (3). 287 - 297. ISSN 0887-6266

May 1993

Bigger, Stephen, Scheirs, J and Delatycki, O (1993) Thermal and photooxidative studies of polyethylene. Macromolecular Symposia, 70-71 (1). 445 - 452. ISSN 1022-1360


Ren, Kebao (1995) Investigation of impregnants for low-cost buildings. PhD thesis, Victoria University of Technology.


Wang, Lijuan (1998) Extraction study of cadmium (II) and copper (II) using Aliquat 336. Research Master thesis, Victoria University of Technology.


Cran, Marlene ORCID: 0000-0002-6000-8093 (2004) Characterization and optimization of polyethylene blends. PhD thesis, Victoria University of Technology.

July 2005

Cran, Marlene ORCID: 0000-0002-6000-8093, Bigger, Stephen and Scheirs, J (2005) Characterizing blends of linear low-density and low-density polyethylene by DSC. Journal of Thermal Analysis and Calorimetry, 81 (2). 321 - 327. ISSN 1388-6150


Milne, Nicholas A, Griffith, Christopher S, Hanna, John V, Skyllas-Kazacos, Maria and Luca, Vittorio (2006) Lithium Intercalation into the Titanosilicate Sitinakite. Chemistry of Materials, 18 (14). pp. 3192-3202. ISSN 0897-4756


Chen, Chih-Yuan, Garnica-Rodriguez, Jairo I, Duke, Mikel, Costa, Roni F Dalla, Dicks, Andrew L and Diniz da Costa, J. C (2007) Nafion/polyaniline/silica composite membranes for hydrogen production and purification. Journal of Power Sources, 166 (2). pp. 324-330. ISSN 0378-7753

Lu, G. Q, Diniz da Costa, J. C, Duke, Mikel, Giessler, S, Socolow, R, Williams, Ruth F. G and Kreutz, T (2007) Inorganic membranes for hydrogen production and purification: A critical review and perspective. Journal of Colloid and Interface Science, 314 (2). pp. 589-603. ISSN 0021-9797

Schnieder, P. Smith, Duke, Mikel, Diniz da Costa, J. C and Liu, M. Abdel-jawad (2007) Energetics for gas separation in microporous membranes. International Journal of Nanotechnology, 4 (5). pp. 468-481. ISSN 1475-7435


Cran, Marlene ORCID: 0000-0002-6000-8093 and Bigger, Stephen W (2009) Effect of Metallocene-Catalyzed Polyethylene on the Physicomechanical Properties of Blends with High-Density Polyethylene or Low-Density Polyethylene. Polymer-Plastics Technology and Engineering, 48 (3). pp. 272-279. ISSN 0360-2559

Cran, Marlene ORCID: 0000-0002-6000-8093, Le Boursicot, Thomas, Ostarcevic, Eddy and Bigger, Stephen W (2009) Kinetics of the Chloramine Degradation of Polyamide Membranes. In: Proceedings of Australia's National Water Conference and Exhibition (Ozwater 09), Melbourne, Australia, 16-18 March 2009. Gale, Allen, ed. Australian Water Association, Artarmon, NSW.


Paimin, Rohani and Scard, Aaron (2010) Investigation of the conditions for the leaching of gilding metal from 5.56 mm projectiles. Project Report. Victoria University, Melbourne.


Cran, Marlene ORCID: 0000-0002-6000-8093, Bigger, Stephen W and Gray, Stephen R (2011) Degradation of polyamide reverse osmosis membranes in the presence of chloramine. Desalination, 283 (1). pp. 58-63. ISSN 0011-9164

Cran, Marlene ORCID: 0000-0002-6000-8093, Gray, Stephen R, Scheirs, John and Bigger, Stephen W (2011) Non-isothermal depolymerisation kinetics of poly(ethylene oxide). Polymer Degradation and Stability, 96 (8). pp. 1497-1502. ISSN 0141-3910

April 2012

Dumee, Ludovic, Hill, Matthew R, Duke, Mikel, Velleman, Leonora, Sears, Kallista, Schutz, Jurg, Finn, Niall and Gray, Stephen R (2012) Activation of gold decorated carbon nanotube hybrids for targeted gas adsorption and enhanced catalytic oxidation. Journal of Materials Chemistry, 22. pp. 9374-9378. ISSN 0959-9428

December 2012

Dumee, Ludovic, Thornton, Aaron, Sears, Kallista, Schutz, Jurg, Finn, Niall, Spoljaric, Steven, Shanks, Robert, Skourtis, Chris, Duke, Mikel and Gray, Stephen R (2012) In situ small angle X-ray scattering investigation of the thermal expansion and related structural information of carbon nanotube composites. Progress in Natural Science: Materials International, 22 (6). pp. 673-683. ISSN 1002-0071


Manchun, S, Dass, Crispin and Sriamornsak, P (2013) Designing nanoemulsion templates for fabrication of dextrin nanoparticles via emulsion cross-linking technique. Carbohydrate Polymers, 101. 650 - 655. ISSN 0144-8617

April 2013

Marney, Donavan, Zhuiykov, S and Kats, E (2013) Innovative electrochemical water quality sensing platform based on sub-micron MexRu3+xO7+x electrodes (Me = Cu, Zn, 0.4 ≤ x ≤ 2): impact of sintering conditions. Measurement Science and Technology, 24 (5). 1 - 2. ISSN 0957-0233

June 2013

Bigger, Stephen W, Munaweera, Kasup, Ngeh, Lawrence, Dann, Peter and Orbell, John (2013) Mathematical Model for Sequential pick-up of chemical contaminants by magnetic particles. Journal of Environmental Engineering, 139 (6). pp. 796-802. ISSN 1943-7870 (print) 0733-9372 (online)


Dumee, Ludovic, She, F, Duke, Mikel ORCID: 0000-0002-3383-0006, Gray, Stephen ORCID: 0000-0002-8748-2748, Hodgson, P and Kong, L (2014) Fabrication of meso-porous sintered metal thin films by selective etching of silica based sacrificial template. Nanomaterials, 4 (3). 686 - 699. ISSN 2079-4991

2 April 2014

Payamyar, P, Kaja, K, Ruiz-Vargas, C, Stemmer, A, Murray, DJ, Johnson, CJ, King, BT, Schiffmann, Florian ORCID: 0000-0002-1355-8084, Vandevondele, J, Renn, A, Götzinger, S, Ceroni, P, Schütz, A, Lee, LT, Zheng, Z, Sakamoto, J and Schlüter, AD (2014) Synthesis of a covalent monolayer sheet by photochemical anthracene dimerization at the air/water interface and its mechanical characterization by AFM indentation. Advanced Materials, 26 (13). 2052 - 2058. ISSN 0935-9648

23 April 2014

Zheng, Z, Opilik, L, Schiffmann, Florian ORCID: 0000-0002-1355-8084, Liu, W, Bergamini, G, Ceroni, P, Lee, LT, Schütz, A, Sakamoto, J, Zenobi, R, Vandevondele, J and Schlüter, AD (2014) Synthesis of two-dimensional analogues of copolymers by site-to-site transmetalation of organometallic monolayer sheets. Journal of the American Chemical Society, 136 (16). 6103 - 6110. ISSN 0002-7863

July 2015

Bigger, Stephen, Cran, Marlene ORCID: 0000-0002-6000-8093 and Bohn, MA (2015) Novel theoretical and computer-assisted modeling of isothermal and non-isothermal depolymerization kinetics. Polymer Testing, 44. 1 - 7. ISSN 0142-9418


Tawakkal, ISMA (2016) Characterisation and antimocrobial activity of poly(lacitc acid)/kenaf bio-composites containing a natural agent. PhD thesis, Victoria University.

April 2016

Joseph, Paul ORCID: 0000-0002-5503-9979, Tretsiakova-McNally, S and Zhang, R (2016) Techniques for Assessing the Combustion Behaviour of Polymeric Materials: Some Current Perspectives and Future Directions. Macromolecular Symposia, 362 (1). 105 - 118. ISSN 1022-1360

2 May 2016

Tawakkal, ISMA, Cran, Marlene ORCID: 0000-0002-6000-8093 and Bigger, Stephen (2016) The influence of chemically treated natural fibers in poly(lactic acid) composites containing thymol. Polymer Composites. ISSN 1548-0569

1 June 2016

Zhang, R-C, Sun, D, Lu, A, Askari, S, Macias-Montero, M, Joseph, Paul ORCID: 0000-0002-5503-9979, Dixon, D, Ostrikov, K, Maguire, P and Mariotti, D (2016) Microplasma Processed Ultrathin Boron Nitride Nanosheets for Polymer Nanocomposites with Enhanced Thermal Transport Performance. ACS Applied Materials and Interfaces, 8 (21). 13567 - 13572. ISSN 1944-8244

July 2016

Fateh, T, Richard, F, Rogaume, T and Joseph, Paul ORCID: 0000-0002-5503-9979 (2016) Experimental and modelling studies on the kinetics and mechanisms of thermal degradation of polymethyl methacrylate in nitrogen and air. Journal of Analytical and Applied Pyrolysis, 120. 423 - 433. ISSN 0165-2370

October 2016

Tawakkal, ISMA, Cran, Marlene ORCID: 0000-0002-6000-8093 and Bigger, Stephen (2016) Effect of Poly(Lactic Acid)/Kenaf Composites Incorporated with Thymol on the Antimicrobial Activity of Processed Meat. Journal of Food Processing and Preservation. x - x. ISSN 0145-8892

20 January 2017

Wrona, M, Cran, Marlene ORCID: 0000-0002-6000-8093, Nerín, C and Bigger, Stephen (2017) Development and characterisation of HPMC films containing PLA nanoparticles loaded with green tea extract for food packaging applications. Carbohydrate Polymers, 156. 108 - 117. ISSN 0144-8617

10 May 2017

Zhang, Juan, Xie, Zongli, Hill, Anita J, Cong, Weiwei, She, Feng Hua, Gao, Weimin, Hoang, Manh and Kong, Ling Xue (2017) Effects of a volatile solvent with low surface tension combining with the silica network reinforcement on retention of LLC structure in polymer matrix. Polymer Bulletin, 75. pp. 581-595. ISSN 0170-0839

October 2017

Smith, GN, Hallett, JE, Joseph, Paul ORCID: 0000-0002-5503-9979, Tretsiakova-McNally, S, Zhang, T, Blum, FD and Eastoe, J (2017) Structural studies of thermally stable, combustion-resistant polymer composites. Polymer Journal, 49 (10). 711 - 719. ISSN 0032-3896


Cran, Marlene ORCID: 0000-0002-6000-8093, Bigger, Stephen W, Venditti, RA, Pawlak, JJ, Livi, S and Ayoub, A (2018) Melt stability of starch-filled LDPE during multi-pass extrusion determined by melt-flow and non-isothermal thermogravimetric investigations. In: Biomass Extrusion and Reaction Technologies: Principles to Practices and Future Potential. Ayoub, A and Lucia, L, eds. ACS Symposium Series, 1304 . American Chemical Society, Washington, DC, pp. 115-136.

20 March 2018

Zolfagharian, A, Kouzani, A, Khoo, S, Noshadi, Amin and Kaynak, A (2018) 3D printed soft parallel actuator. Smart Materials and Structures, 27 (4). ISSN 0964-1726

4 December 2018

Jones, M, Bhat, T, Kandare, E, Thomas, Ananya, Joseph, Paul ORCID: 0000-0002-5503-9979, Dekiwadia, C, Yuen, R, John, S, Ma, J and Wang, CH (2018) Thermal Degradation and Fire Properties of Fungal Mycelium and Mycelium: Biomass Composite Materials. Scientific Reports, 8. ISSN 2045-2322

5 April 2019

Sedayu, Bakti B, Cran, Marlene ORCID: 0000-0002-6000-8093 and Bigger, Stephen W (2019) A Review of Property Enhancement Techniques for Carrageenan-based Films and Coatings. Carbohydrate Polymers, 216. pp. 287-302. ISSN 0144-8617

9 December 2019

Pooley, Lachlan, Abu-Bakar, AS, Cran, Marlene ORCID: 0000-0002-6000-8093, Wadhwani, Rahul ORCID: 0000-0003-0675-8800 and Moinuddin, Khalid ORCID: 0000-0002-1831-6754 (2019) Measurements of specific heat capacity of common building materials at elevated temperatures: a comparison of DSC and HDA. Journal of Thermal Analysis and Calorimetry. ISSN 1388-6150


Sedayu, Bakti B (2020) Development of Semi-Refined k-Carrageenan-Based Films for Food Packaging Applications. PhD thesis, Victoria University.